Anchorage designs carbon fiber.

Many design requirements require the existence of an anchor that allows transfer efforts carbon fiber to other elements on different planes, is the case where an anchor or foundation base slabs or walls is required.

One type anchor range, commonly known as bowtie and technically as anchor Kobayashi.

Mainly, you can run after drilling the element carbon fiber is inserted, and the bore is sealed with epoxy, but has the disadvantage that you can not achieve anchoring depths of more than 20 cm.
However our company has successfully developed an anchor which greatly facilitates this task by executing a perforation with an auger or brush 2, allowing reach any anchoring depth. Then a grooved metal rod is then connected to the carbon fiber, generating transfer inserts between fiber, steel bar and the element to which you want to anchor